how-to-check-hard-disk-health

Checking HDD Errors

Hard drive failure could be a heart breaking event. However, it happens to all of us someday, all isn’t permanently gone.  There are some easy methods for Checking HDD Errors by performing data you can judge that if your hard is in good health or not. Hard drive failure happens once the HDD fails to perform properly and the data saved on your PC will now not be accessed. Hard drive failure occurs for variety of reasons, starting from hardware lifetime to human error therefore we should keep Checking HDD Errors at regular intervals.

Data Loss – Do’s And Dont’s Once Drive Fail

In the event of hard drive failure don’t panic because it’s important to stay calm and don’t take wrong steps which may result in severe harm and data loss. If you start to listen to screeching sounds, clicking noise, whirring or clattering on your system S.M.A.R.T operates and point out an error, I powerfully advocate to stop using the drive to avoid more harm and start Checking HDD Errors.

Data Loss – Things You should NOT do at any scenario !!

  • Do not restart and Turn off your PC regularly.
  • Logical Damage- Even with logical damage, like the accidental deletion of directories or files running OS recovery, reformatting or file system errors will result in deadly repercussions. As you use the PC the system ,makes temporary files and swap all the informations. This may overwrite essential data sectors necessary to finish a thriving data recovery. It’s extremely suggested to stop using the system and instantly contact a data recovery specialist.
  • Don’t try the Freezer Trick – A general online tale that tells that putting hard drive into the Deep freeze will recover the data is absolutely wrong. It can lead to more damages and outcome will PCB short circuit furthermore misaligned read/write heads will cause motor failure.

Referencehttp://www.howtogeek.com/134735/how-to-see-if-your-hard-drive-is-dying/

Types of Hard Drive Failure

1. check hard drive errorsSoftware or firmware damage might cause hard drive to become unreadable and inaccessible causing not able to interact properly with the system.
2. Issues with the controller board on the hard drive can cause electronic failure
3. Mechanical failure can occur if the parts of the drive gets faulty like motor and read/write head assembly
4. Logical damage might happen when there is an issue with the data on the drive. That’s why its necessary for Checking HDD Errors and then troubleshoot the problems.

Hard Drive Failure Troubleshooting

Time and again, it is a good method to keep Checking HDD Errors for any kind of errors by using the inbuilt tool which is available in Windows that is known as CHKDSK elaborate as Check Disk. It is essential that you keep an eye on your Hard Drive health and bad sector.

How do hard Drive errors Occurs?

Other than the CD/DVD disks in your computer or laptop, the hard disk is the only part with moving parts, that spins at speeds upto 7200 revolutions per minute whether you are doing any task or not. Due to this only, wear & tear, file errors or even bad sectors on the physical drive may happen. Sometimes human errors like Power surges, jerking or dropping the computer (specially laptops) may results in giving errors.

Take Assistance of CHKDSK For Checking HDD Errors

CHKDSK will start looking Checking HDD Errors as well as file issues. Mostly, you don’t recognize that your hard disk has an error unless you run CHKDSK program. So, first of all run the CHKDSK utility program. By the way let me tell you there are basically 2 methods perform CHKDSK, one is the graphical and the other one is the command-line version. To run the graphical version, Go To Start>Computer and right-click on the drive you want to check after that click Properties> Go to the Tools tab then Click the Check Now button. You will see a new window tab, in this tab there will be 2 options will be present:

  1. Automatically Fix File System Errors (Default)
  2. Scan for and attempt recovery of bad sectors

Source: http://windows.microsoft.com/en-in/windows-vista/check-your-hard-disk-for-errors

Check HDD ErrorsAt first instance, leave the boxes unchecked and click on Start and wait for the report. To get the full and detailed report Click on the Details arrow. If no errors are found, that’s excellent! But if, errors were discovered then you should run the CHKDSK program once again with Automatically fix file system errors option checked. Remember one thing, if you try to run this on your Windows partition, it will suggest you that the file system is in use and if you want to keep Checking HDD Errors the next time you start your PC? Select Schedule disk check option and then the next time you restart your Windows system the CHKDSK utility will run before Windows starts up. When the process gets completed, it will display the reports on your screen.

And if you go for the second option which is mentioned above, this will cause CHKDSK to perform a sector-by-sector surface check of the hard drive, that will enormous time. If Check Disk finds a bad sector, it automatically try to retrieve any data saved in the sector and it points the sector as damaged or not working so that no data can be saved there in the future. Therefore, have to glance at CHKDSK soon and keep your information safe by Checking HDD Errors.

For More Info Visit- http://www.thewindowsclub.com/check-your-hard-disk-for-errors-in-windows

  1. After study a couple of the blog posts on your own site now, and I
    actually enjoy your manner of blogging. I bookmarked it to my
    bookmark site list and will be checking back soon. Pls check out my web site
    also and I would like to know what you believe.

    Stop by my web blog :: shadow fight 2 hack free download (Bernard)

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes:

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>